• 06 833 6947
  • Hours 7.30am to 4:30pm

Continence - Fixation or Holding Pants

Date: 02-09-2026

USING SHAPED CONTINENCE PADS WITH FIXATION OR HOLDING PANTS

Shaped continence pads are designed to provide absorbent protection while following the natural contours of the body.

Unlike pull-up pants or all-in-one products, a shaped pad is not normally designed to stay securely in position by itself. It generally needs to be worn with suitable fixation or holding pants that help keep the pad correctly positioned against the body.

Using the correct combination of pad and fixation pants can improve fit, comfort and security and help the absorbent product perform as intended.

WHAT IS A SHAPED CONTINENCE PAD?

A shaped continence pad is an absorbent product designed to sit close to the body and provide protection for moderate through to heavier continence needs, depending on the particular product.

Rather than having its own waistband or fastening tabs, the pad is normally held in position by a separate fixation garment.

Shaped pads are available in different sizes and absorbency levels and may be suitable for both mobile users and people who require assistance with continence care.

Their contoured shape helps position the absorbent area where it is required while allowing the pad to be changed separately from the fixation garment.

WHAT ARE FIXATION OR HOLDING PANTS?

Fixation pants — sometimes referred to as holding pants — are reusable or disposable garments designed to hold a shaped continence pad securely against the body.

They generally resemble close-fitting stretch underwear and are designed to provide support around the waist, hips and legs.

Their purpose is not primarily to provide absorbency. Instead, they help:

  • keep the continence pad correctly positioned
  • maintain close contact between the pad and the body
  • reduce movement during normal activity
  • support the pad around the legs
  • improve comfort and security
  • help the pad perform as intended.

The pad provides the absorbency; the fixation pants provide the support.

WHY NOT JUST USE ORDINARY UNDERWEAR?

Ordinary underwear may not provide the same level of support as purpose-designed fixation pants.

Loose-fitting underwear can allow a shaped pad to move, fold or sit away from the body. This can affect comfort and may increase the potential for leakage even when the pad itself has sufficient absorbency.

Fixation pants are specifically designed to hold the pad close to the body while accommodating its shape and absorbent core.

This is particularly important with larger shaped pads, which require more support than smaller inserts or light continence pads.

SHAPED PADS AND FIXATION PANTS AT A GLANCE

Feature Shaped Continence Pad Fixation/Holding Pants
Primary purpose Absorb and retain liquid Hold the pad securely
Provides absorbency Yes Generally no
Worn against the body Yes Over the pad
Available in different sizes Yes Yes
Reusable Generally no Depends on product
Changed when pad is wet Yes Not necessarily
Correct fit important Yes Yes

 

Product designs and specifications vary between manufacturers. Always check the instructions for the individual pad and fixation garment.

 

WHY IS CORRECT POSITIONING IMPORTANT?

A shaped pad is designed so that particular areas of the absorbent core sit in specific positions against the body.

If the pad moves significantly during wear, its ability to capture and retain liquid may be reduced.

Correct positioning also helps the leg areas of the pad sit appropriately against the body, reducing gaps through which leakage could occur.

Fixation pants help maintain this position during walking, sitting, standing and other normal movement.

HOW SHOULD A SHAPED CONTINENCE PAD BE FITTED?

Always follow the manufacturer's fitting instructions for the particular product.

As a general principle, the pad should be opened and prepared according to those instructions before being positioned correctly against the body.

The fixation pants are then used to hold the pad securely in place.

Once fitted, check that:

  • the pad is centred correctly
  • the absorbent area is positioned as intended
  • the pad is not folded or twisted
  • the leg areas sit correctly
  • the fixation pants hold the pad securely
  • there are no obvious gaps
  • the wearer is comfortable.

A secure fit should not require excessive tightness.

SHOULD THE PAD BE FOLDED BEFORE FITTING?

Some shaped continence products are designed to be prepared or folded in a particular way before fitting to help activate their shape and improve positioning.

The exact method varies between manufacturers.

For this reason, avoid assuming that every shaped pad should be prepared in the same way. The fitting instructions supplied by the manufacturer should always be followed.

HOW TIGHT SHOULD FIXATION PANTS BE?

Fixation pants should generally fit closely enough to support the pad without being excessively tight.

If they are too loose, the pad may move or sag during wear.

If they are too tight, they may cause discomfort or affect how the pad sits against the body.

The correct size should therefore be selected using the manufacturer's sizing information rather than simply choosing the wearer's normal underwear size.

DO THE PAD AND FIXATION PANTS NEED TO BE THE SAME SIZE?

Not necessarily.

The sizing systems used for shaped pads and fixation pants may be different, even when they are supplied by the same manufacturer.

The pad size may relate to factors such as body measurements, product dimensions and absorbency requirements, while the fixation garment has its own sizing range.

Each product should therefore be selected according to its own manufacturer's sizing guide.

CAN FIXATION PANTS BE REUSED?

This depends on the particular product.

Many fixation pants are designed to be washable and reusable, while others may be intended for limited or single use.

Where reusable fixation pants are used, follow the manufacturer's washing and care instructions. Washing temperature, drying method and the use of particular laundry products can potentially affect the garment's elasticity and useful life.

Fixation pants should be replaced when they no longer provide sufficient support or when required by the manufacturer's recommendations.

WHEN SHOULD THE SHAPED PAD BE CHANGED?

The pad should be checked and changed according to the wearer's individual requirements and the manufacturer's guidance.

A higher absorbency product should not simply be used as a way of avoiding appropriate changes.

Some continence pads incorporate a wetness indicator that can assist carers or users in assessing whether the product may require changing without immediately removing it.

Features vary between products, so the individual product specifications should be checked.

WHAT IF THE PAD LEAKS?

Leakage does not automatically mean that a higher-absorbency pad is required.

Before changing absorbency levels, check:

  • whether the pad is correctly positioned
  • whether the pad is the correct size
  • whether the fixation pants are the correct size
  • whether the fixation pants are providing sufficient support
  • whether the pad has moved or folded
  • whether the product is becoming saturated before changing.

If the fit and positioning are correct and the product is regularly reaching its capacity, then a different absorbency level may need to be considered.

WHO MAY BENEFIT FROM SHAPED PADS AND FIXATION PANTS?

Shaped pads combined with suitable fixation pants can provide a flexible continence system for a variety of users.

They may be considered where:

  • moderate to heavier protection is required
  • the wearer is mobile
  • assisted continence care is provided
  • changing the absorbent pad separately is convenient
  • a close and secure fit is required
  • different absorbency levels are required at different times.

The most appropriate product system will depend on the individual and their care requirements.

SHAPED PAD OR ALL-IN-ONE PRODUCT?

Both product types can provide higher levels of continence protection, but they are constructed differently.

A shaped pad requires a separate fixation garment to hold it in place. An all-in-one product incorporates its own fastening system and does not require separate holding pants.

For some users, the pad-and-fixation-pant system may offer greater flexibility. For others, particularly where mobility is limited or assisted changing is required, an all-in-one product may be more practical.

Neither format is automatically better. The appropriate choice depends on fit, mobility, protection requirements, changing routine and personal preference.

GETTING THE BEST FROM SHAPED CONTINENCE PADS

For reliable performance:

  • select the appropriate pad size and absorbency
  • use suitable fixation or holding pants
  • choose the correct fixation-pant size
  • follow the manufacturer's fitting instructions
  • position the pad correctly
  • check that the pad remains secure during wear
  • change the pad when required
  • replace fixation pants when they no longer provide adequate support.

The pad and fixation garment should be considered as a system. Correct absorbency is important, but so are fit, positioning and support.

NEED HELP CHOOSING SHAPED PADS OR FIXATION PANTS?

HBPCS supplies a range of continence products with different sizes and absorbency levels.

If you're unsure whether a shaped pad and fixation-pant system is appropriate, or need help comparing available products, contact the HBPCS Team and we can help you review the product specifications.

For more general information about product sizing, see How to Choose the Correct Size Continence Product.

For an explanation of the different product formats, see Continence Pads, Pants or All-In-One Products – What’s the Difference?


Published: September 2026
Last reviewed: September 2026
Read time: 5 minutes

Disclaimer

The information in this article is intended as a general guide only and is not medical or clinical advice. Continence requirements vary between individuals, and product suitability, sizing, absorbency, fitting methods and performance can vary between manufacturers. Always follow the manufacturer's product and fitting instructions and, where appropriate, seek advice from a healthcare professional.